HANDLE
REMOVABLE FOREARM REST (REGULAR OR SHORT)
CURVED CUTTING AND SCRAPING TOOL
STRAIGHT BORING AND CUTTING TOOL
COMPLETE BIT SET AND SOME EXTRA ONES
SPARE SCREWS AND SET SCREWS
ALLEN WRENCHES
FOUR REDUCTION INSERTS (LISTED BELOW)

ASSEMBLED WITH STRAIGHT BORING CUTTER AND FOREARM REST

ASSEMBLED WITH THE CURVED CUTTING AND SCRAPING TOOL (SCRAPING BIT PICTURED) AND WITHOUT THE FOREARM REST FOR PISTOL GRIP FLEXIBILITY AND EASY OF USE.

1 EACH 1 1/4" HSS CUTTING BIT AND HOLDER
1 EACH TEARDROP STYLE 1/8" THICK HSS SCRAPER BIT
1 EACH CAP WASHER FOR USE WITH THE SCRAPER BIT OR THE CUTTING BIT AND HOLDER AS MAY BE DESIRED.

THE CUTTING AND SCRAPING BITS.
EACH SET COMES WITH:
2 EACH 1/4" SQUARE x 2 1/2" HSS CUTTING BITS
1 EACH 3/16" ROUND 1 1/2" HSS SIDE CUTTING BITS
1 EACH 3/16" SQUARE x 2 1/2" HSS CUTTING BIT
1 EACH 1 1/4" HSS CUTTING BIT AND HOLDER
1 EACH LARGE TEARDROP STYLE 1/8" THICK HSS SCRAPER BIT
1 EACH SMALL TEARDROP STYLE 1/8" THICK HSS SCRAPER BIT
1 EACH CAP WASHER FOR USE WITH THE SCRAPER BIT OR THE CUTTING BIT AND HOLDER AS MAY BE DESIRED.HAVE A CHOICE OF EITHER GRINDING ALL 4 TIPS ALIKE OR CREATING A COUPLE OF DIFFERENT TIP STYLES OR BOTH. IMAGINE, ONE TRIP TO THE GRINDER WITH A DULL TOOL INSTEAD OF FOUR.
HERE'S GREAT NEWS.  THESE INEXPENSIVE CUTTING BITS CAN BE PURCHASED FROM YOUR LOCAL MACHINE SHOP SUPPLY FOR AS LOW AS $1.50 EACH.
(IF YOU COULD EVER WEAR THEM OUT IN THE FIRST PLACE).
WE WANT YOUR RETURN BUSINESS, BUT NOT FOR THE SAME TOOL!
MADE TO LAST A LIFETIME.

NEW

SC 140
This adaptor fits into the end of the Scorpion Straight Tool. Use all of the bits for the Scorpion Curved Tool with the Scorpion Straight Tool. Also attach any tool that with a 10-32 screw hole or larger to the Scorpion Straight Tool

THE STRAIGHT BORING AND CUTTING BITS
EACH TOOL IS MADE FROM 3/4" 1018 STEEL AND CHROME PLATED.
THIS VERSATILE TOOL WILL HOLD EITHER:
1/4" SQUARE x 2 1/2" HSS CUTTING BIT
3/8" ROUND TOOLS OR TOOL BUTS
3/16" ROUND 1 1/2" HSS SIDE CUTTING BIT
3/16" SQUARE x 2 1/2" HSS CUTTING BIT

CURVED CUTTING AND SCRAPING TOOL

THE HANDLE
MADE COMPLETELY FROM 1018 STEEL.
CHROMED WITH FOAM GRIP.
THE TOOL COUPLING IS 3/4" I.D. AND 1 1/4" O.D. YIELDING A FULL 1/4" THICK WALL FOR TOOL SUPPORT AND SAFETY.

REMOVABLE FOREARM RESTS
NEED THE SHORT OF THE LONG?

THESE 3/4" BAR, 1018 STEEL, CHROME PLATED UNITS, COME IN LENGTHS OF 8 3/4" OR 6 3/4".

THE HANDLE AND FOREARM SUPPORT

A WONDERFUL COMBINATION OF POWER, SUPPORT, AND VERSATILITY IN A GREAT COMBINATION OF HOLLOW VESSEL TOOLS FOR THE TURNER.

DON PENCIL SCORPION
INSERTS REDUCE THE SCORPION 3/4" HANDLE I.D. TO
 5/8" - 1/2" - 7/16" - 3/8"
GOT ANOTHER TOOL YOU WOULD LIKE TO USE IN THE SCORPION HANDLE?  THESE INSERTS WILL GET YOU THERE.